Panasonic KX-TG7731C Operating Instructions Manual

Contents

Panasonic KX-TG7731C Operating Instructions Manual Manual pdf 18 page image

Link to cell featureTo use this feature, you must first register andconnect your cellular phones to the base unit(page 18).Your cellular phones must have Bluetoothwireless technology that is compatible with thisproduct.This feature allows you to:– make or answer cellular calls using yourhome phone (handset or base unit) withbetter reception.– maximize the benefits of cellular services(such as free night and weekend calls, orcellular to cellular call plans) by utilizingunused peak minutes with your homephone.– conserve the battery power of your cellularphone while the unit is on a cellular call.(We recommend charging your cellularphone during the cellular call as yourcellular phone battery is being consumed.)Important:R Up to 2 cellular phones can be registered.However, only one Bluetooth device(cellular phone or headset) can beconnected to the base unit at a time.R Locate your cellular phone near the baseunit. If the cellular phone is too close to thebase unit during a cellular call, you mayhear noise. For best performance, werecommend placing the cellular phonebetween 0.6 m to 3 m (2 feet to 10 feet)away from the base unit.TrademarksR The Bluetooth® word mark and logos areowned by the Bluetooth SIG, Inc. and anyuse of such marks by PanasonicCorporation is under license. All othertrademarks identified herein are theproperty of their respective owners.Registering a cellularphoneImportant:R For more details and the list of compatiblecellular phones, please visit our Web site:http://www.panasonic.ca/link2cellR Before registering a Bluetooth enabledcellular phone to the base unit:– we recommend you change the PIN(page 21).– make sure that no Bluetooth device suchas a Bluetooth headset is connected toyour cellular phone.1 Handset:MMENUNFor CELL 1: #6241For CELL 2: #6242R After the CELL 1 or CELL 2 indicatoron the base unit starts flashing red, therest of the procedure must becompleted within 5 minutes.2 Your cellular phone:While the CELL 1 or CELL 2 indicator isflashing red, follow the instructions of yourcellular phone to enter the registrationmode.R Depending on your cellular phone, itmay ask you to enter the base unit PIN(default: “0000”).3 Handset:Wait until a long beep sounds.R It may take more than 10 seconds tocomplete registration.R When the CELL 1 or CELL 2 indicatorlights green, the cellular phone isconnected to the base unit. You areready to make cellular calls.4 To select which unit receives calls for thecellular line, press MOKN then continuefrom step 3, “Selecting which unitreceives cellular calls”, page 19.R If not required, go to step 5.5 MOFFNNote:R Make sure that your cellular phone is set toconnect to this product automatically. Referto your cellular phone’s operatinginstructions.R Make sure you cancel your cellular phone’scurrent registration if you want to register itto the other line (page 21).18Link to CellTG7731_41C_(en-en)_1207_ver.021.18 18 2011/12/07 19:53:58