Panasonic KX-TG7731C Operating Instructions Manual

Contents

Panasonic KX-TG7731C Operating Instructions Manual Manual pdf 69 page image

Problem Cause/solutionI cannot operate the answeringsystem remotely.R The remote access code is not set. Set the remoteaccess code (page 53).R You are entering the wrong remote access code. If youhave forgotten your remote access code, enter theremote access code setting to check your current code(page 53).R The answering system is turned off. Turn it on (page 54).R You cannot operate the answering system when calling acellular phone registered to the base unit.Bluetooth PINProblem Cause/solutionI cannot remember the PIN. R Change the PIN using the following method.1 MMENUN#6192 *70003 Enter the new 4-digit PIN. a MOKN4 Enter the new 4-digit PIN again. a MSAVEN a MOFFNLiquid damageProblem Cause/solutionLiquid or other form of moisturehas entered the handset/baseunit.R Disconnect the AC adaptor and telephone line cord fromthe base unit. Remove the batteries from the handset andleave to dry for at least 3 days. After the handset/baseunit are completely dry, reconnect the AC adaptor andtelephone line cord. Insert the batteries and charge fullybefore use. If the unit does not work properly, contact anauthorized service centre.Caution:R To avoid permanent damage, do not use a microwave oven to speed up the drying process.69Useful InformationTG7731_41C_(en-en)_1207_ver.021.69 69 2011/12/07 19:54:01