Panasonic KX-TG7861NZ Operating Instructions Manual

Also see for KX-TG7861NZ: Operating instructions

Making calls1 Lift the handset and dial the phonenumber.R To correct a digit, press MCN.2 Press M N.3 When you finish talking, press MeN orplace the handset on the base unit orcharger.Using the speakerphone1 Dial the phone number and press MZN.R Speak alternately with the other party.2 When you finish talking, press MeN.Note:R For best performance, use thespeakerphone in a quiet environment.R To switch back to the receiver, press MZN/M N.Adjusting the receiver or speakervolumePress MDN or MCN repeatedly while talking.Making a call using the redial listThe last 10 phone numbers dialled are storedin the redial list (each 24 digits max.).1 MEN (T)2 MbN: Select the desired phone number.3 M NStoring a number to the phonebook1 MEN (T)2 MbN: Select the desired phone number.a M N a M N3 To store the name, continue from step 3,“Adding entries”, page 18.Erasing a number in the redial list1 MEN (T)2 MbN: Select the desired phone number.a M N3 MbN: “Yes” a MOKN a MeNPause (for PBX/long distance serviceusers)A pause is sometimes required when makingcalls using a PBX or long distance service.When storing a calling card access numberand/or PIN in the phonebook, a pause is alsoneeded (page 19).Example: If you need to dial the line accessnumber “0” when making outside calls with aPBX:1 0 a MDN (Pause)2 Dial the phone number. a M NNote:R A 3 second pause is inserted each time MDN(Pause) is pressed.Answering calls1 Lift the handset and press M N or MZNwhen the unit rings.R You can also answer the call bypressing any dial key from 0 to 9,*, or #. (Any key answer feature)2 When you finish talking, press MeN orplace the handset on the base unit orcharger.Auto talkYou can answer calls simply by lifting thehandset off the base unit or charger. You donot need to press M N. To turn this featureon, see page 24.Adjusting the handset ringer volumen While the handset is ringing for anincoming call:Press MDN or MCN repeatedly to select thedesired volume.n Programming the volume beforehand:1 M N (right soft key) #16015Making/Answering CallsTG7861_62NZ(en)_0121_ver003.pdf 15 2013/01/21 9:48:15