*9 If you register 2 or more key finders.*10 If you have 2 or more key finders.*11 You can set the handset display backlight while on charge.– “On”: Backlight is on (dimmed).– “Off”: Backlight turns off after 10 seconds of charging.*12 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing anykeys, including confirmation tones and error tones.*13 If you subscribe to a Caller ID service and want to view the caller’s information after lifting upthe handset to answer a call, turn off this feature.*14 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBXsupplier if necessary.*15 To prevent other users from joining your conversations with outside callers, turn this featureon.*16 This menu icon is displayed when the key finder is not registered.Special programmingAlarmAn alarm sounds at the set time for 1 minuteand is repeated 5 times at 5 minute intervals(snooze function). A text memo can also bedisplayed for the alarm. A total of 3 separatealarm times can be programmed for eachhandset. You can set one of 3 different alarmoptions (once, daily, or weekly) for each alarmtime.Important:R Set the date and time beforehand(page 14).1 M N (right soft key) #7202 Select an alarm by pressing 1 to 3. aMOKN3 MbN: Select the desired alarm option. aMOKN“Off”Turns alarm off. Go to step 9.“Once”An alarm sounds once at the set time.“Daily”An alarm sounds daily at the set time.Go to step 5.“Weekly”Alarm sounds weekly at the set time(s).4 Proceed with the operation according toyour selection in step 3.n Once:Enter the desired date and month. aMOKNn Weekly:MbN: Select the desired day of the weekand press M N. a MOKN5 Set the desired time. a MOKN6 Enter a text memo (10 characters max.;page 40). a MOKN7 MbN: Select the desired alarm tone. aMOKNR We recommend selecting a differentringer tone from the one used foroutside calls.8 MbN: Select the desired snooze setting.a MOKN9 MOKN a MeNR When the alarm is set, is displayed.Note:R Press M N to stop the alarm completely.R When the handset is in use, the alarm willnot sound until the handset is in standbymode.R Press any dial key or M N to stop thesound but keep the snooze functionactivated.26ProgrammingTG7861_62NZ(en)_0121_ver003.pdf 26 2013/01/21 9:48:16