Panasonic KX-TG8051FX Operating Instructions Manual

Panasonic KX-TG8051FX Operating Instructions Manual Manual pdf 16 page image

Getting Started16Display language16 display languages are available.1 1 (middle soft key) y11z2 {r}: Select your desired language. sM3 {ic}Date and time1 1 (middle soft key) y1z12 Enter the current date, month, and year.s MExample: 15 July, 201115 z7 11L You can select the date format bypressing y:– dd/mm/yy (date/month/year)– yy/mm/dd3 Enter the current hour and minute.Example: 9:30z9 3zL You can select 24-hour or 12-hourclock format (“AM” or “PM”) bypressing /.4 M s {ic}Note:L The date and time may be incorrect after apower failure. In this case, set the date andtime again.Dialling modeIf you cannot make calls, change this settingaccording to your telephone line service. Thedefault setting is “Tone”.“Tone”: For tone dial service.“Pulse”: For rotary/pulse dial service.1 1 (middle soft key) y12z2 {r}: Select the desired setting.3 M s {ic}One touch eco modeWhen the handset is on the base unit, the baseunit transmission power is reduced up to99.9% if only one handset is registered.Even when the handset is not on the base unitor several handsets are registered, the baseunit transmission power in standby mode canbe reduced up to 90% by activating one toucheco mode.You can turn on/off one touch eco mode by justpressing {ECO/R}. The default setting is“Normal”.– When the one touch eco mode is on: “Low”is temporarily displayed and i is shownon the handset display instead of w.– When the one touch eco mode is off:“Normal” is temporarily displayed andi goes off from the handset display.Note:L When there is another cordless phonenearby and it is in use, the base unittransmission power may not be reduced.L Activating one touch eco mode reduces therange of the base unit in standby mode.L If you set the repeater mode to “On” (page33):– One touch eco mode is cancelled.– “Eco Setup” is not shown in the displaymenu (page 27).TG8051_8061FX(e-e).book Page 16 Monday, April 25, 2011 11:42 AM