Intercom/Locator46IntercomIntercom calls can be made betweenhandsets.Note:L If you receive an outside call while talkingon the intercom, you hear 2 tones. Toanswer the call, press {ic}, then press{C}.L When paging the handset, the pagedhandset beeps for 1 minute.Making an intercom call1 1 (middle soft key) s 42 {r}: Select the desired unit. s ML To stop paging, press {ic}.3 When you finish talking, press {ic}.Answering an intercom call1 Press {C} to answer the page.2 When you finish talking, press {ic}.Handset locatorYou can locate a misplaced handset by pagingit.1 Base unit: Press {x}.L All registered handsets beep for 1minute.2 To stop paging:Base unit: Press {x}.Handset: Press {ic}.Transferring calls,conference callsOutside calls can be transferred or aconference call with an outside party can bemade between 2 handsets.1 During an outside call, press 4 to putthe call on hold.2 {r}: Select the desired unit. s M3 Wait for the paged party to answer.L If the paged party does not answer,press ^ to return to the outside call.4 To complete the transfer:Press {ic}.L The outside call is being routed to thedestination unit.To establish a conference call:1 s {r}: “Conference” s ML To leave the conference, press {ic}.The other 2 parties can continue theconversation.L To put the outside call on hold: 1 s{r}: “Hold” s MTo resume the conference: 1 s{r}: “Conference” s MNote:L If you want to return to the outside call afterthe paged party answers, press W.Answering a transferred callPress {C} to answer the page.TG8051_8061FX(e-e).book Page 46 Monday, April 25, 2011 11:42 AM