Panasonic KX-TG8421FX Operating Instructions Manual

Also see for KX-TG8411FX: Quick guide

Programming30– “Multi Items”: Multiple entries/allmenu icons are shown on one screenat a time.– “Single Item”: An entry/a menuicon is shown on one screen in largecharacters at a time.The default setting is “Multi Items”.1 1 (centre of joystick) i N iM2 {V}/{^}: “Display Setup” iM3 {V}/{^}: “Display Mode” i M4 {V}/{^}: Select the desired setting.i M i {ih}Note:L When A is displayed as a right softkey on the handset, you cantemporarily switch the display modeby pressing A (page 15).L When in multiple items display mode,you can move screens by pushing thejoystick right or left, without scrollingdown or up through the list:– Push the joystick right to go to thenext screen.– Push the joystick left to return to theprevious screen.Setting call restrictionYou can restrict selected handsets fromdialling certain numbers. You can assignup to 6 phone numbers to be restricted,and select which handsets are to berestricted. Storing area codes hereprevents the restricted handsets fromdialling any phone number in that areacode.1 1 (centre of joystick) i ! iM2 {V}/{^}: “Call Restrict” iM3 Enter the base unit PIN (default:“0000”).L If you forget your PIN, contactyour nearest Panasonic servicecentre.4 Set which handsets to be restrictedby pressing the desired handsetnumber.L All the registered handsetnumbers are displayed.L Flashing numbers indicate callrestriction is turned on for thecorresponding handset.L To turn call restriction off for ahandset, press the number again.The number stops flashing.5 M6 {V}/{^}: Select a memory location.i M7 Enter the phone number or areacode to be restricted (8 digits max.).i M i {ih}L To erase a restricted number,press ^.Changing the base unit PIN(Personal IdentificationNumber)Important:L If you change the PIN, please makenote of your new PIN. The unit will notreveal the PIN to you. If you forgetyour PIN, contact your nearestPanasonic service centre.1 1 (centre of joystick) i ! iM2 {V}/{^}: “Base Unit PIN” iM3 Enter the current 4-digit base unitPIN (default: “0000”).4 Enter the new 4-digit base unit PIN.i M i {ih}TG8411-8421FX(e).book Page 30 Tuesday, March 3, 2009 2:54 PM