Panasonic KX-TG8551FX Operating Instructions Manual

Panasonic KX-TG8551FX Operating Instructions Manual Manual pdf 44 page image

Using SMSSMS allows you to send and receive textmessages between other fixed-line and mobilephones that support compatible SMSnetworks and features.Important:R To use SMS features, you must:– subscribe to a Caller ID and/or anappropriate service such as SMS.– confirm that SMS is turned on.– confirm that the correct message centrenumbers are stored.Contact your service provider/telephonecompany for details and availability.Note:R A total of 47 messages (at 160 characters/message) can be saved. Total number maybe more than 47 if length of messages isless than 160 characters/message.R If the unit is connected to a PBX system,you may not be able to use SMS features.Turning SMS on/off1 (middle soft key) #3572 MbN: Select the desired setting. aa M NStoring SMS messagecentre numbersSMS message centre numbers must bestored in order to send and receive SMSmessages.For Czech:The message centre numbers (used for SMSservices provided by Telefonica O2) arepreprogrammed in this unit. You can changethem if necessary.For Slovakia:The message centre numbers (used for SMSservice provided by Slovak Telecom - T-Com)are preprogrammed in this unit. You canchange them if necessary.R Contact your service provider/telephonecompany for more information.R If you change the unit’s region setting/resetthe base unit, the stored message centrenumbers will be deleted or changed(page 28). In this case, store the numbersagain if necessary.1 To store “Message Centre1”:(middle soft key) #351To store “Message Centre2”:(middle soft key) #3522 Edit the number as necessary. aa M NNote:R For PBX users:– You need to add the PBX line accessnumber and a dialling pause to thebeginning of the Message Centre 1number.– If you only use the Message Centre 1number for SMS, store the MessageCentre 1 number as is (without adding aline access number or dialling pause) toMessage Centre 2.Sending a messageWriting and sending a newmessage1 (middle soft key) a a2 MbN: “Create” aR If “DUse Last Text?” is displayed,you can use the text from the lastmessage you created by pressing MDN.3 Enter a message. aR You can change the character entrymode by pressing (page 54).4 Enter the destination phone number (20digits max.). aTo use the redial list:MEN (T) a MbN: Select the phonenumber. a 2 timesTo use the caller list:44SMS (Short Message Service)TG8551_61FX_(en-en)_0427_ver021.44 44 2012/04/27 20:24:47