Panasonic KX-TG9541 Operating Instructions Manual

Also see for KX-TG9541: Operating instructions Quick guide Quick guide Operating instructions

Contents

Link to cell featureTo use this feature, you must first pair and connectyour cellular phones to the base unit (page 18).Your cellular phones must have Bluetooth wirelesstechnology that is compatible with this product.This feature allows you to:– make or answer cellular calls using your homephone (handset or base unit) with betterreception.– maximize the benefits of cellular services (suchas free night and weekend calls, or cellular tocellular call plans) by utilizing unused peakminutes with your home phone.– conserve the battery power of your cellularphone while the unit is on a cellular call. (Werecommend charging your cellular phone duringthe cellular call as your cellular phone battery isbeing consumed.)Important:R You may pair a maximum of 4 cellular phonesand 1 headset. However, the base unit allowsonly one Bluetooth to be active at a time.R Locate your cellular phone near the base unit. Ifthe cellular phone is too close to the base unitduring a cellular call, you may hear noise. Forbest performance, we recommend placing thecellular phone between 0.6 m to 3 m (2 feet to10 feet) away from the base unit.Pairing a cellular phoneProgram this setting using either the base unit orone of the handsets.Important:R For more details and the list of compatiblecellular phones, please visit our Web site:http://www.panasonic.com/link2cellR Before pairing a Bluetooth enabled cellularphone to the base unit, make sure that no otherBluetooth device such as a Bluetooth headset isconnected to your cellular phone.Handset / Base unit1 For CELL 1: MMENUN#6241For CELL 2: MMENUN#6242For CELL 3: MMENUN#6243For CELL 4: MMENUN#6244R After the corresponding CELL indicator onthe base unit starts flashing, the rest of theprocedure must be completed within 5minutes.2 Your cellular phone:While the corresponding CELL indicator isflashing, follow the instructions of your cellularphone to enter the pairing mode.R Depending on your cellular phone, it mayask you to enter the base unit PIN (default:“0000”).3 Wait until a long beep sounds.R It may take more than 10 seconds tocomplete pairing.R When the CELL indicator lights up, thecellular phone is connected to the base unit.You are ready to make cellular calls.4 Proceed with the operation for your unit.Handset: MOFFNBase unit: MEXITNNote:R Make sure that your cellular phone is set toconnect to this product automatically. Refer toyour cellular phone’s operating instructions.R Make sure you cancel your cellular phone’scurrent pairing if you want to pair it to the otherline (page 18).R The default setting for the text message alertfeature is “On”, so when you pair your cellularphone to the base unit, this feature may beactivated (page 51). (This depends on theversion and type of cellular phone you areusing.)Unpairing a cellular phoneYou can cancel the pairing of a cellular phone thatis stored in the base unit.Program this setting using either the base unit orone of the handsets.Handset / Base unit1 For CELL 1: MMENUN#6111For CELL 2: MMENUN#6112For CELL 3: MMENUN#6213For CELL 4: MMENUN#62142 MbN: “Yes” a MSELECTNR When the cellular phone is unpaired, theCELL indicator is turned off.3 Proceed with the operation for your unit.Handset: MOFFN18 For assistance, please visit http://www.panasonic.com/helpLink to Cell