Panasonic KX-TG9541 Operating Instructions Manual

Also see for KX-TG9541: Operating instructions Quick guide Quick guide Operating instructions

Contents

from the base unit. This feature allows the baseunit to try to reconnect the cellular phone atregular intervals when it returns within base unitrange. You can set the interval. The default settingis “1 min”.Program this setting using either the base unit orone of the handsets.Important:R When you are using a cellular line or aBluetooth headset, the base unit loses itsconnection from other Bluetooth devices(cellular phone or headset). To automaticallyresume the connection to cellular phones, leavethe auto connection on.R Some cellular phones lose connection afterusage, please check the specifications of yourcellular phone for more details.Handset / Base unit1 MMENUN#6322 MbN: Select the desired setting. a MSAVEN3 Proceed with the operation for your unit.Handset: MOFFNBase unit: MEXITNNote:R Some cellular phones may ask you if you acceptthe connection requirement from the base unit.In that case, select “Off” in step 2. Check thespecifications of your cellular phone.Connecting/disconnecting the cellular phonemanuallyIf you will not be using the paired cellular phone’slink to cell feature temporarily (for example, you donot want the unit to ring when your cellular linereceives a call), you can disconnect your cellularphone from the base unit. If you want to use itagain, reconnect the cellular phone to the baseunit.Program this setting using either the base unit orone of the handsets.Note:R Even if a paired cellular phone wasdisconnected from the base unit, if it is broughtwithin the base unit’s range during the autoconnection interval, it may automaticallyconnect to the base unit (page 19).R A disconnected cellular phone is not unpairedfrom the base unit, so pairing it to the base unitagain is unnecessary.Handset / Base unit1 To connect/disconnect:For CELL 1: MMENUN#6251For CELL 2: MMENUN#6252For CELL 3: MMENUN#6253For CELL 4: MMENUN#6254R A long beep sounds.2 Proceed with the operation for your unit.Handset: MOFFNBase unit: MEXITNCellular line selectionHandsetThis feature determines which cellular line isselected to make cellular calls when you pressMCELLN on the handset.The following settings are available:– “Manual” (default): You can select the desiredcellular line when making a call.– “Cellular phone 1”: CELL 1 is selected.– “Cellular phone 2”: CELL 2 is selected.– “Cellular phone 3”: CELL 3 is selected.– “Cellular phone 4”: CELL 4 is selected.1 MMENUN#6342 MbN: Select the desired setting. a MSAVEN3 MOFFNStoring your area code (for dialingonly a 7-digit phone number to makea local call)You need to add your area code when makingcellular calls to a phone number in your area.Once you store your area code, it is automaticallyadded to the beginning of the 7-digit phonenumber when making cellular calls.Program this setting using either the base unit orone of the handsets.Handset / Base unit1 MMENUN#6332 Enter the 3-digit area code.R To correct a digit, press MCLEARN.3 MSAVEN4 Proceed with the operation for your unit.Handset: MOFFNBase unit: MEXITN20 For assistance, please visit http://www.panasonic.com/helpLink to Cell