Panasonic KX-TG9581 Operating Instructions Manual

Contents

Handset / Base unit1 For line 1: MMENUN#3381For line 2: MMENUN#33822 MbN: “Remote code” a MSELECTN3 MbN: Select the desired setting. a MSAVEN4 Proceed with the operation for your unit.Handset: MOFFNBase unit: MEXITNListening to messagesAfter you answer the new message alert, you canlisten to the messages as follows.n When the remote access code is set to“Inactivate”:Press 4 to play the new message during theannouncement.n When the remote access code is set to“Activate”:1 Enter the remote access code (page 66)during the announcement.2 Press 4 to play the new message.Note:R Within 10 seconds after listening to newmessages, you can press #9 during the callto turn off the new message alert by a callfeature.R Even if the unit makes a new message alert call,the handset redial list does not show the record.However, on the base unit redial list it is shownas “Message alert”.Remote operationUsing a touch-tone phone, you can call yourphone number from outside and access the unit tolisten to messages or change answering systemsettings. The unit’s voice guidance prompts you topress certain dial keys to perform differentoperations.Remote access codeA 3-digit remote access code must be enteredwhen operating the answering system remotely.This code prevents unauthorized parties fromlistening to your messages remotely. The defaultsetting is “111”.Program this setting using either the base unit orone of the handsets.Important:R To prevent unauthorized access to this product,we recommend that you regularly change theremote code.Handset / Base unit1 For line 1: MMENUN#3061For line 2: MMENUN#30622 Enter the desired 3-digit remote access code.3 MSAVEN4 Proceed with the operation for your unit.Handset: MOFFNBase unit: MEXITNDeactivating remote operationPress * in step 2 on “Remote access code”,page 66.R The entered remote access code is deleted.Using the answering system remotely1 Dial your landline phone number from atouch-tone phone.2 After the greeting message starts, enter yourremote access code.3 Follow the voice guidance prompts asnecessary or control the unit using remotecommands (page 67).4 When finished, hang up.Voice guidancen When the English voice guidance is selectedDuring remote operation, the unit’s voiceguidance starts and prompts you to press 1 toperform a specific operation, or press 2 tolisten to more available operations.n When the Spanish voice guidance is selectedTo start the voice guidance, press 9. The voiceguidance announces the available remotecommands (page 67).Note:R If you do not press any dial keys within 10seconds after a voice guidance prompt, the unitdisconnects your call.66 For assistance, please visit http://www.panasonic.com/helpAnswering System for LandlineTG958x_0704_ver031.pdf 66 2014/07/04 10:32:28