Main menu: “Baby monitor”Sub-menu 1 Sub-menu 2 Settings CodeOn/Off – On<Off>#268 35Sensitivity level – LowHigh#269 36Main menu: “Key detector”*7Sub-menu 1 Sub-menu 2 Settings CodeSearch – – #655 –Battery check – –*1 If you program these settings using one of the units, you do not need to program the sameitem using another unit.*2 This menu is not displayed when scrolling through the display menus. It is only available indirect command code.*3 KX-TGE440 series: page 3*4 This feature allows the unit to automatically adjust the date and time each time callerinformation including date and time is received.To turn this feature on, select “Caller ID auto”. To turn this feature off, select“Manual”. (Caller ID subscribers only)To use this feature, set the date and time first (page 14).*5 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 to2). If you select a melody, you cannot distinguish lines by their ringers.*6 The preset melodies in this product (“Tone 3” - “Melody 10”) are used with permission of© 2004 - 2013 Copyrights Vision Inc.*7 This setting is available when you have the key detector (KX-TGA20). Read the installationmanual for more information on the key detector.*8 For models with supplied key detectors, the display shows “1: Detector1”.*9 If you register 2 or more key detectors.*10 If you subscribe to a Caller ID service and want to view the caller’s information after lifting upthe handset to answer a call, turn off this feature.*11 The flash time depends on your telephone exchange or host PBX. Contact your PBXsupplier if necessary. The setting should stay at “700 ms” unless pressing MFLASHN fails topick up the waiting call.*12 Generally, the line mode setting should not be changed. This setting automatically maintainsreceiver volume at the proper level depending on the current telephone line condition. Setthe line mode to “A” if telephone line condition is not good.For assistance, please visit http://shop.panasonic.com/support 33Programming
