Error messagesDisplay message Cause/solutionAsk phonecompany forVM access #R You have not stored the voicemail access number. Store thenumber (page 47).Base no powerorNo link. Re-connect baseAC adaptor.orNo link.R Confirm the base unit’s AC adaptor is connected to the unitand the power outlet correctly.R The handset has lost communication with the base unit. Movecloser to the base unit and try again.R Unplug the base unit’s AC adaptor to reset the unit.Reconnect the adaptor and try again.R The handset’s registration may have been canceled.Re-register the handset (page 37).R When “No link.” is displayed during a power failure, placea handset on the base unit to supply power to the base unit.Busy R The called unit is in use.R Other units are in use and the system is busy. Try again later.R The handset you are using is too far from the base unit. Movecloser and try again.Check tel line R The supplied telephone line cord has not been connected yetor not connected properly. Check the connections (page 10).Error!! R Recording was too short. Try again.Invalid R There is no handset registered to the base unit matching thehandset number you entered.R The handset is not registered to the base unit. Register thehandset (page 37).Requiressubscriptionto Caller ID.R You must subscribe to a Caller ID service. Once you receivecaller information after subscribing to a Caller ID service, thismessage will not be displayed.Userechargeablebattery.R A wrong type of battery such as alkaline or manganese wasinserted. Use only the rechargeable Ni-MH batteries noted onpage 4, 7.For assistance, please visit http://shop.panasonic.com/support 51Useful Information