Resetting to a pre-recorded greetingmessageUse this procedure to erase your greetingmessage and use a pre-recorded one.1 MMENUN#3042 MYESN a MOFFNPlaying back the greetingmessage1 MMENUN#3032 To exit, press MOFFN.Listening to messagesImportant:R When using the base unit or handset tolisten to messages, the noise reductionfeature (page 18) is activated automaticallyin spite of the setting ( is notdisplayed).Using the base unitWhen new messages have been recorded,M N on the base unit flashes.Press M N (PLAY).R During playback, M N on the base unitlights.R If new messages have been recorded, thebase unit plays back new messages.R If there are no new messages, the baseunit plays back all messages.Operating the answering systemduring playbackKey OperationMjN or MkN Adjust the speakervolumeM N Repeat message*1M N Skip messageM N (STOP) Stop playbackKey OperationMERASEN Erase currently playingmessage*1 If pressed within the first 5 seconds of amessage, the previous message isplayed.Erasing all messagesPress MERASEN 2 times while the unit is not inuse.Using the handsetWhen new messages have been recorded:– “New message” is displayed.– The message indicator on the handsetflashes slowly if the message indicator isturned on (page 46).1 To listen to new messages:MMENUN#323To listen to all messages:MMENUN#3242 When finished, press MOFFN.Note:R To switch to the receiver, press M N.R You can also use the MPLAYN soft key, ifdisplayed, to play new messages.Operating the answering systemMMENUN a MbN: “Answering device” aMSELECTNKey OperationMjN or MkN Adjust the receiver/speakervolume (during playback)1 or MFN Repeat message (duringplayback)*12 or MEN Skip message (duringplayback)3 Enter the “Settings” menu4 Play new messages5 Play all messages6 Play greeting message42 For assistance, please visit http://shop.panasonic.com/supportAnswering System