Telemarketing call blockIn addition to Automated call block (page 26), youcan use Telemarketing call block to further screencalls to stop telemarketer calls from gettingthrough.Using this feature, the unit will prompt callers tosay their names, and after checking the names,you can decide whether to answer the calls or not.Note:R While screening the call, call waiting feature isunavailable (page 18).Operating telemarketing call blockHandset1 During an outside call, lift the handset andthen press MTELE.BLK.N.R The unit prompts callers to say their names.2 To answer the call:Press M N or MZN.To block the call:Press MCALL BLOCKN*1 a MYESN.R The unit announces that the call will bedisconnected, and disconnects the call.R The caller will be registered to call block list.*1 The user can still answer the call afterpressing MCALL BLOCKN. To answer the call,press M N or MZN.Base unit1 Press MTELE.BLK.N during an outside call.R The unit prompts callers to say their names.2 To answer the call:Lift the corded handset or press MZN.To block the call:Press MCALL BLOCKN*1 a MYESN.R The unit announces that the call will bedisconnected, and disconnects the call.R The caller will be registered to call block list.*1 The user can still answer the call afterpressing MCALL BLOCKN. To answer the call,lift the corded handset or press MZN.Note:R If there is no response from the caller, and theuser does not press any key in step 2 within 10seconds, the unit will announce that the call willbe disconnected, and disconnects the call.Note for handset:R While on the charger, the MTELE.BLK.N key isnot available. Lift the handset from the chargerto use this feature.R To use this feature, set the Auto talk feature to“Off”.28 For assistance, please visit http://shop.panasonic.com/supportEnhanced Call BlockTGF85x_(en)_1023_ver001.pdf 28 10/23/2019 1:26:11 PM