Panasonic KX-TGH260 Operating Instructions Manual

Also see for KX-TGHA20: Installation manual Installation manual

Contents

Panasonic KX-TGH260 Operating Instructions Manual Manual pdf 24 page image

2 MbN: “Hold” a MSELECTN3 To answer the 2nd call:Press MCELLN while the 2nd call is beingreceived.4 To hang up the 2nd call and return to the1st call (landline call), press MOFFN, thenpress M N.Answering a 2nd call during a cellularcall1 Press MMENUN during a cellular call.2 MbN: “Hold” a MSELECTN3 To answer the 2nd call:Press M N or MCELLN while the 2nd callis being received.4 To hang up the 2nd call and return to the1st call (cellular call), press MOFFN, thenpress MCELLN*1.*1 If you press MCELLN and the selection listis displayed, select the desired cellularline and press MSELECTN.IntercomIntercom calls can be made betweenhandsets.Note:R When paging unit(s), the paged unit(s)beeps for 1 minute.R If you receive an outside call while talkingon the intercom, the interrupt tone sounds(page 35).To answer the call with the handset, pressMOFFN, then press the corresponding linekey.Making an intercom call1 MMENUN (right soft key) a aMSELECTN2 MbN: Select the desired unit. a MSELECTN3 When you finish talking, press MOFFN.Note:R You can also use the MINTERCOMN softkey, if displayed, to make intercom calls.Answering an intercom call1 Press M N to answer the page.2 When you finish talking, press MOFFN.Using the Smart function keyPress M N to answer the page.Power back-up operationfor landlineWhen a power failure occurs, the chargedhandset temporarily supplies power to thebase unit (power back-up mode). This allowsyou to make and receive landline calls using ahandset during a power failure. The base unitwill not perform any other functions. However,some functions such as Caller ID andphonebook are available only when using ahandset other than the handset supplyingpower to the base unit. You can program“Power failure” and the default setting is“Auto” (page 37).Important:R If a handset is not placed on the base unitwhen a power failure occurs, “Base nopower Press OFF” is displayed. Afterpressing MOFFN on the handset, place it onthe base unit to start power back-up mode.R Power back-up mode will not work if thebattery level of the power supplyinghandset is or .R Do not lift the power supplying handsetfrom the base unit during power back-upmode.24 For assistance, please visit http://www.panasonic.com/helpMaking/Answering Calls