in multiple items display mode, you can switch the screen to confirm the detailed informationby:– pressing MDETAILN, or– pressing MMENUN a MbN: “Detail” a MSELECTN*18 You can set the handset display backlight while on charge.– “On”: Backlight is on (dimmed).– “Off”: Backlight turns off after 10 seconds of charging. Additionally, less power isconsumed if you leave the handset on the base unit or charger after the battery is fullycharged.*19 If you subscribe to a Caller ID service and want to view the caller’s information after lifting upthe handset to answer a call, turn off this feature.*20 The flash time depends on your telephone exchange or host PBX. Contact your PBXsupplier if necessary. The setting should stay at “700 ms” unless pressing MFLASHN fails topick up the waiting call.*21 Generally, the line mode setting should not be changed. This setting automatically maintainsreceiver volume at the proper level depending on the current telephone line condition. Setthe line mode to “A” if telephone line condition is not good.AlarmAn alarm sounds at the set time for 1 minuteand is repeated 5 times at 5 minute intervals(snooze function). A text memo can also bedisplayed for the alarm. A total of 5 separatealarm times can be programmed for eachhandset. You can set one of 3 different alarmoptions (once, daily, or weekly) for each alarmtime.Important:R Make sure the unit’s date and time settingis correct (page 14).1 MMENUN (right soft key) #7202 Select an alarm by pressing 1 to 5. aMSELECTN3 MbN: Select the desired alarm option. aMSELECTN“Off”Turns alarm off. Go to step 10.“Once”An alarm sounds once at the set time.“Daily”An alarm sounds daily at the set time.Go to step 5.“Weekly”Alarm sounds weekly at the set time(s).4 Proceed with the operation according toyour selection in step 3.n Once:Enter the desired month and date. aMOKNn Weekly:MbN: Select the desired day of the weekand press MSELECTN. a MOKN5 Set the desired time.6 *: Select “AM” or “PM”. a MOKN7 Enter a text memo (30 characters max.).a MOKN8 MbN: Select the desired alarm tone. aMSELECTNR We recommend selecting a differentringer tone from the one used foroutside calls.9 MbN: Select the desired snooze setting.a MSAVEN10 MSELECTN a MOFFNNote:R Press MSTOPN to stop the alarm completely.R When the handset is in use, the alarm willnot sound until the handset is in standbymode.For assistance, please visit http://www.panasonic.com/help 39Programming