Transferring calls, conferencecallsOutside calls can be transferred or aconference call with an outside party can bemade between 2 handsets.1 During an outside call, press MMENUN.2 MbN: “Intercom” a MSELECTN3 MbN: Select the desired unit. a MSELECTNR If you select “Voice paging”, thecall will be switched from theear-receiver mode to thespeakerphone mode.4 Wait for the paged party to answer.R If the paged party does not answer,press MBACKN to return to the outsidecall.5 To complete the transfer:Press MOFFN.To establish a conference call:MMENUN a MbN: “Conference” aMSELECTNR To leave the conference, press MOFFN.The other 2 parties can continue theconversation.R To put the outside call on hold:MMENUN a MbN: “Hold” aMSELECTNTo resume the conference: MMENUNa MbN: “Conference” a MSELECTNR To cancel the conference: MMENUN aMbN: “Stop conference” aMSELECTNYou can continue the conversationwith the outside caller.Transferring a cellular callbetween the handset and acellular phoneTransferring a cellular call from thehandset to a cellular phone1 Press MMENUN during a cellular call.2 MbN: “Transfer to cell” aMSELECTNR The cellular call is transferred to thecellular phone.Note:R Depending on your cellular phone type, youmay need to set the cellular phone to beready to talk before transferring. Forexample, if your cellular phone has a topcover, open it beforehand.Transferring a cellular call from acellular phone to the handsetDuring a conversation using a cellular phone,the call cannot be transferred to the handsetby the cellular phone. Perform the followingwith the handset.1 During a conversation using a cellularphone, press MCELLN.R The call is transferred to the handset inthe following situations.– Only 1 cellular phone is paired.– A specific line is set to make cellularcalls (page 19).2 MbN: Select the corresponding cellularphone. a MSELECTNR The call is transferred to the handset.Answering a 2nd callIf you receive a call while talking on the phone,the interrupt tone sounds (page 37) and the2nd caller’s information is displayed if yousubscribe to Caller ID service (page 45).Answering a 2nd call during alandline call1 Press MMENUN during a landline call.2 MbN: “Hold” a MSELECTN3 To answer the 2nd call:Press MCELLN while the 2nd call is beingreceived.4 To hang up the 2nd call and return to the1st call (landline call), press MOFFN, thenpress M /ZN.24 For assistance, please visit http://shop.panasonic.com/supportMaking/Answering CallsTGL46x(en)_1118_ver044.pdf 24 2015/11/18 9:33:30