Panasonic KX-TGM420 Operating Instructions Manual

Also see for KX-TGM420: Operating instruction Operating instructions Operating instructions Operating instructions

Contents

Making calls1 Lift the handset and then dial the phonenumber.R To correct a digit, press MCLEARN.2 Press MTALKN to make the call.R To make the call using thespeakerphone, press MZN.3 When you finish talking, press MOFFN orplace the handset on the base unit orcharger.Note:R While talking, you can switch between thereceiver and the speakerphone by pressingMZN.R In step 1, you can store the dialed phonenumber to the phonebook by pressingMSAVEN.Making a call using the redial listThe last 5 phone numbers dialed are stored inthe redial list (each 48 digits max.).1 MEN REDIAL2 MbN: Select the desired entry.3 MTALKNErasing a number in the redial list1 MEN REDIAL2 MbN: Select the desired entry. aMERASEN3 MbN: “Yes” a MSELECTN a MOFFNAdjusting the receiver orspeaker volumeHandsetPress MjN or MkN on the side repeatedlywhile talking.R The available settings vary by model andwhether volume booster is turned on or off(page 24).R Pressing the MBOOSTN key activates thevolume booster feature. Use this key withcare. To prevent hearing damage, werecommend that you set this product to thelowest volume setting at which you canhear adequately.Base unitPress MjN or MkN repeatedly while talking.Pause (for PBX/longdistance service users)A pause is sometimes required when makingcalls using a PBX or long distance service.When storing a calling card access numberand/or PIN in the phonebook, a pause is alsoneeded (page 40).Example: If you need to dial the line accessnumber “9” when making outside calls with aPBX:1 9 a MDN (Pause)2 Dial the phone number. a MTALKNNote:R A 3.5 second pause is inserted each timeyou press MDN (Pause) on the handset.Answering callsUsing the handsetWhen a call is being received, the messageindicator flashes rapidly if the handsetmessage indicator’s “Incoming call”setting is enabled (page 28).1 Lift the handset and then press MTALKNor MZN when the unit rings.2 When you finish talking, press MOFFN orplace the handset on the base unit orcharger.Any key answer: You can answer the call bypressing any dial key (1 to 9, *, or #).Auto talk: You can answer calls simply bylifting the handset (page 47).Temporary handset ringer off: You can turnthe ringer off temporarily by pressing M N (leftsoft key).32 For assistance, please visit http://shop.panasonic.com/supportMaking/Answering CallsTGM420_450(en)_0426_ver031.pdf 32 2016/04/26 10:55:38