Panasonic KX-TGP500 B01 User Manual

Also see for KX-TGP500: Quick guide Quick guide User guide Administrator's guide Quick user guide

Contents

Panasonic KX-TGP500 B01 User Manual Manual pdf 29 page image

Y Programming using the Handset29Document Version 2010-07Call forwardIncoming calls can be forwarded to another party.You can choose one of 3 modes:– “Unconditional”: All incoming calls areforwarded.– “Busy”: Incoming calls while the line is in useare forwarded.– “No Answer”: Incoming calls after a certainnumber of rings are forwarded. The defaultsetting of the number of ring count is “3”. Tochange the setting, perform “Changing the ringcount”, page 29.Important:L We recommend setting with your administrator.Contact your administrator for furtherinformation.L If this feature is set on your unit, it may beoverridden by your phone system settings.L This feature is not available on shared lines.L The call is logged in the caller list (page 42) withQ after the call is forwarded.Turning call forward on/off1 1 (centre of joystick)2 {V}/{^}: “IP Service” i M3 {V}/{^}: “Call Features” i M4 {V}/{^}: “Call Forward” i M5 Proceed with the desired operation.■ When 1 line is registered:Go to step 6.■ When 2 or more lines are registered:{V}/{^}: Select the desired line. i M6 {V}/{^}: Select the desired option. i M7 {V}/{^}: “On/Off” i M8 {V}/{^}: Select “On” or “Off”. i ML If you select “Off”, press {i} to exit.L If the phone number forwarded to has beenalready set, press {i} to exit. To changethe phone number, perform from step 7,“Changing the phone number”, page 29,then press {i} to exit.9 Enter the phone number you want to forwardcalls to (24 digits max.). i ML If you have selected “No Answer”, enterthe number of rings before the unit forwardscalls (0, 2-20 rings). i M10 {i}Changing the phone number1 1 (centre of joystick)2 {V}/{^}: “IP Service” i M3 {V}/{^}: “Call Features” i M4 {V}/{^}: “Call Forward” i M5 Proceed with the desired operation.■ When 1 line is registered:Go to step 6.■ When 2 or more lines are registered:{V}/{^}: Select the desired line. i M6 {V}/{^}: Select the desired option. i M7 {V}/{^}: “Phone Number” i M8 Enter the phone number you want to forwardcalls to (24 digits max.). i M i {i}Changing the ring countYou can change the number of rings before whichthe call is forwarded if “No Answer” is selected.1 1 (centre of joystick)2 {V}/{^}: “IP Service” i M3 {V}/{^}: “Call Features” i M4 {V}/{^}: “Call Forward” i M5 Proceed with the desired operation.■ When 1 line is registered:Go to step 6.■ When 2 or more lines are registered:{V}/{^}: Select the desired line. i M6 {V}/{^}: “No Answer” i M7 {V}/{^}: “Number of Rings” i M8 Enter the number of rings before the unitforwards calls (0, 2-20 rings). i M i{i}Do Not DisturbThis feature allows the unit to reject calls onselected lines.The default setting is “Off”.