Panasonic KX-TGP500 B01 User Manual

Also see for KX-TGP500: Quick guide Quick guide User guide Administrator's guide Quick user guide

Contents

Panasonic KX-TGP500 B01 User Manual Manual pdf 31 page image

Y Programming using the Handset31Document Version 2010-07■ Erasing a number:1 i {V}/{^}: “Erase” i M i{V}/{^}: “Yes” i M i {i}Note:L When editing, press the desired dial key to add,^ to erase.Anonymous calls (BlockCaller ID)This feature allows the unit to make a callanonymously.The default setting is “Off”.Important:L We recommend setting with your administrator.Contact your administrator for furtherinformation.1 1 (centre of joystick)2 {V}/{^}: “IP Service” i M3 {V}/{^}: “Call Features” i M4 {V}/{^}: “Block Caller ID” i M5 Proceed with the desired operation.■ When 1 line is registered:Go to step 6.■ When 2 or more lines are registered:{V}/{^}: Select the desired line. i M6 {V}/{^}: Select “On” or “Off”. i M i{i}Changing the base unit PIN(Personal IdentificationNumber)Important:L If you change the PIN, please make note of yournew PIN. The unit will not reveal the PIN to you.If you forget your PIN, contact your phonesystem dealer.1 1 (centre of joystick) i {#}{1}{3}{2}2 Enter the current 4-digit base unit PIN (default:“0000”).3 Enter the new 4-digit base unit PIN. i Mi {i}Changing the handset nameEach handset can be given a customised name(“Bob”, “Kitchen”, etc.). This is useful when youmake intercom calls between handsets. You canalso select whether or not the handset name isdisplayed in standby mode. The default setting is“Off”. If you select “On” without entering anyhandset name, “Handset 1” to “Handset 6” isdisplayed.1 1 (centre of joystick) i {#}{1}{0}{4}2 Enter the desired name (10 characters max.;see the character table, page 48).L If not required, go to step 3.3 M4 {V}/{^}: “On” i M i {i}Date and timeSet if the unit does not show the date and time. Youcan set the date and time through the Web userinterface and also program it to adjustautomatically using the SNTP. Also summer timesetting is available through the Web user interface.Contact your administrator for further information.1 1 (centre of joystick) i {#}{1}{0}{1}2 Enter the current date, month, and year.Example: 15 March, 2010{1}{5} {0}{3} {1}{0}3 Enter the current hour and minute.Example: 9:30{0}{9} {3}{0}L You can select 24-hour or 12-hour clockformat (“AM” or “PM”) by pressing /.4 M i {i}Note:L To correct a digit, push the joystick left, right, up,or down to move the cursor to the digit, thenmake the correction.