Intercom Features44 Document Version 2011-03Intercom features betweenhandsetsIntercomIntercom calls can be made between handsets.Note:L If you receive an outside call while talking on theintercom, you hear interrupt tones (page 27). Toanswer the call, press {OFF}, then press {C}.L When paging the handset, the paged handsetbeeps for 1 minute.Making an intercom call1 {MENU} (center of joystick) i {V}/{^}:“Intercom” i {SELECT}2 {V}/{^}: Select the desired unit. i {CALL}L To stop paging, press {OFF}.3 When you finish talking, press {OFF}.Answering an intercom call1 Press {C} to answer the page.2 When you finish talking, press {OFF}.Auto intercom/Room monitorThis feature allows you to:– answer an intercom call without pressing anybuttons on the handset.– listen to the sound in a room where the handsetis located.Turning auto intercom on/off“Off” (Default): Turns this feature off.“On (Ringer On)”: When an intercom call isreceived, the handset rings 2 times then thespeakerphone is automatically turned on.“On (Ringer Off)”: When an intercom call isreceived, the handset does not ring and thespeakerphone is automatically turned on. Thisallows you to easily monitor a baby’s room, forexample, from different areas of the house.1 {MENU} (center of joystick) i{#}{2}{7}{3}2 {V}/{^}: Select the desired setting.3 {SAVE} i {OFF}Note:L Auto intercom cannot be used when:– your handset is receiving a transferredoutside call.– all handsets are being paged by the base unit.Answering an intercom call using autointercom1 When you are paged by another handset,speak into the microphone.L To switch to the receiver, press {C}.2 To end the intercom, press {OFF}.Monitoring audio in a roomYou can listen to the sound in a room whereanother handset is located.Important:L Before using this feature, set auto intercom onthe destination handset to “On (RingerOff)” to allow access by other handsets.1 Call the destination handset (page 44).L You can listen to the audio.2 To mute your sound output, press {MUTE} ifnecessary.3 Press {OFF} to stop monitoring.Transferring callsOutside calls can be transferred between 2handsets.1 During an outside call, press {MENU}.2 {V}/{^}: “Intercom” i {SELECT}3 {V}/{^}: Select the desired handset. i{CALL}4 Wait for the paged party to answer.L If the paged party does not answer, press{C} to return to the outside call.5 {OFF}Transferring a call without speaking to theother handset user1 Perform from step 1 to 3, “Transferring calls”,page 44.2 {OFF}L The outside call rings at the other handset.