Making/Answering CallsFor assistance, please visit http://www.panasonic.com/phonehelp 25Making/Answering CallsMaking callsUsing the handset1 Lift the handset.L The prime line (see “Prime line” onpage 42) is automatically selectedand the line indicator lights.L The display shows the length ofthe call.2 Dial the phone number.L The dialed number is displayed. Ifyou dial a phone number longerthan 15 digits, all the digits will beshifted to the left side.3 When you finish talking, place thehandset on the cradle.L The line indicator goes out.L The length of the call will remainon the display for a few seconds.Note:L The line indicator flashes whileanother phone is using the line.Using the speakerphone1 Press {SP-PHONE}.L The SP-PHONE indicator lights.L The prime line (see “Prime line” onpage 42) is automatically selectedand the line indicator lights.L The display shows the length ofthe call.2 Dial the phone number.L The dialed number is displayed. Ifyou dial a phone number longerthan 15 digits, all the digits will beshifted to the left side.L If you misdial, press {SP-PHONE}and start again from step 1.3 When you finish talking, press{SP-PHONE}.L The SP-PHONE and the lineindicators go out.L The length of the call will remainon the display for a few seconds.Note:L The line indicator flashes whileanother phone is using the line.L Use the speakerphone in a quietenvironment.L In step 1, you can select a line bypressing a line button with an unlitindicator instead of pressing{SP-PHONE}. Be sure that thehandsfree mode is set to“Speakerphone” (see “Handsfreemode” on page 42).Switching between handset andspeakerphoneSwitching from handset tospeakerphonePress {SP-PHONE}, then place thehandset on the cradle.Switching from speakerphone tohandsetLift the handset.Adjusting the handset volume (5levels) or speaker volume (8 levels)Press {-} or {+} repeatedly whiletalking.Redialing the last number dialed1 Lift the handset or press{SP-PHONE} or a line button.2 Press {REDIAL/PAUSE}.Making a call using the redial listThe last 6 phone numbers dialed arestored in the redial list.1 Press {REDIAL/PAUSE}.2 Press {V} or {^} to select thedesired number.3 Lift the handset or press{SP-PHONE} or a line button.