Multi-unit Operation36 For assistance, please visit http://www.panasonic.com/phonehelpPaging a designatedextensionImportant:L Turn Do Not Disturb (DND) off at thedestination extension (see “Turning DoNot Disturb (DND) on/off ” onpage 27).1 Press {INTERCOM} 2 times.L The INTERCOM indicator lights.L The SP-PHONE indicator lightsand the speakerphone turns on.2 Press the speed dial (extension)button or enter the extensionnumber, then speak into the MIC orthe handset.L The destination extension does notring, instead it will beep 3 times.L You can make an intercom call bypressing {INTERCOM}.3 To end the paging, place the handseton the cradle or press {SP-PHONE}.Answering a single pageIf auto mute is set to onLift the handset or press {MUTE}.If auto mute is set to offSpeak into the MIC or the handset.Turning auto mute on/offIf this feature is set to off, sounds at thepaged extension is heard automatically.Important:L Make sure that the unit is in standbymode.1 Press {MENU/SET}.2 Select “Phone Setup”, then press{MENU/SET}.3 Select “Auto Mute”, then press{MENU/SET}.4 Select the desired setting, then press{MENU/SET}.5 Press and hold {MENU/SET} toreturn to standby mode.Note:L To return to the previous menu, press{<}.Paging all extensionsImportant:L Turn Do Not Disturb (DND) off at thedestination extension (see “Turning DoNot Disturb (DND) on/off ” onpage 27).1 Press {INTERCOM}.L The INTERCOM indicator lights.L The SP-PHONE indicator lightsand the speakerphone turns on.2 Press {0} to page all extensions,then speak into the MIC or thehandset.L The other extensions will hear yourpaging voice through the speaker.3 To end the paging, place the handseton the cradle or press {SP-PHONE}or {INTERCOM}.Note:L You can only talk with an extensionwho answers first.Answering all pagesPress {INTERCOM}.➔Auto MuteTone/PulseFlash Time[V/^]:ScrollAuto Mute=On[SET]:Save[V/^]:Change