System Administrator 4-654.5.5 System Parameter Settings4.5.5.6.2 Dialing ParametersSystem Administration Top Menu → 1 → 5 → 6 → 2Program – System Parameter – Others – Dialing Parameter MenuNumber of Digits to Access Outside Line (0-8 digits) --- : 1Call Transfer No-answer Time (10-60 sec) ----------------- : 20Outgoing Call No-answer Time (10-90 sec) ---------------- : 30Pause Time ------------------------------------------------------------ : 2Outgoing Call Setup Sequence ---------------------------------- : T . . . . . . . . . .Specifies the number of digits required to accessan outside line.Example:If the PBX requires callers to dial ‘9’ in order toaccess an outside line, this parameter should beset to 1 digit. This causes the system to beaware that, when dialing the number 9–123–4567for example, outgoing call setup sequence is doneafter the initial ‘9’ is dialed. The full sequence istherefore: 9– [outgoing call setup sequence] –123–4567.For periodic port usage reports, the VPS candiscriminate between local and long distance callsand can report outgoing calls and calling timesfor billing purpose.Specifies the amount of time that the VPS shouldwait before receiving the transferred call if thereis no answer at the destination extension.Specifies the amount of time that the VPS shouldwait before concluding that the outgoing call willnot be answered.Specifies the pause duration which is used at thetime of entering telephone numbers in the VPS.It is a pause time between dialed digits.OutgoingCall SetupSequencep.4-66Port UsageReportp.7-18Description/Function Reference0–8 digits(1)10–60 sec(20)10–90 sec(30)1–9 sec(2)Value Range(default)ParameterNumber of Digitto AccessOutside LineCall TransferNo-answer TimeOutgoing CallNo-answer TimePause TimeE.M.D.Servicep.3-22M.W.N.-Devicep.3-38Call TransferStatusp.3-10
