Panasonic KX-TVS100 Quick Installation Manual

Also see for KXTVS100 - VOICE MAIL SYSTEM: User guide Subscriber's guide Installation manual Installation manual

6.26COMMON DIGITAL INTEGRATION FEATURES AND SETUP PROCEDURESL IVE CALL S CREENING (LCS) PROGRAMMINGLCS notifies subscribers of incoming messages to their mailboxes. The notification method is programmablefor hands-free or private. Hands-free allows the user to monitor a recording through the speaker-phone and, ifdesired, intercept the call by lifting the handset. The private mode notifies the user with an alert tone when amessage is being recorded. By pressing the LCS button, the user can monitor the message and intercept the callby going off-hook. Programming also determines whether the mailbox continues to record after the userintercepts the call.L IVE CALL S CREENING RECORDING MODE ASSIGNMENTThis program allows the VPS to continue recording the conversation in the mailbox after the extensionintercepts the call during the Live Call Screening.1. Enter [610].2. Press the NEXT button (sp-phone).Screen Output: Jack No.?3. Enter the jack number.Screen Output: # _ _ Stop Recording(_ _ = the jack number you entered)4. Press the SELECT button (Auto-Ans) until the desired selection is displayed.5. Press STORE.6. Press the NEXT button (Sp-Phone).7. Repeat Steps 4, 5, and 6 until all jacks are programmed.Conditions: Only available with D-PITS Integration.L IVE CALL S CREENING PRIVATE /H ANDS -FREE MODE ASSIGNMENTThis program assigns a VPS response for when a message is being left in a mailbox. It determines whether analert tone is sent and whether the recorded message is played through the built-in speaker of the extension. Thedefault mode is hands-free. (This is a station level program and should be done at each individual phone.)1. Enter PITS programming:a. With the phone on-hook, press the PROGRAM button.b. Dial [99]. (Display changes to PT-Prg Mode.)2. Dial the code for the mode you want this phone to have.Hands-Free = 71Private = 72Screen Output: Hands-Free or Private3. Press STORE.4. Exit the program mode by pressing the PROGRAM button.5. Repeat these steps at each telephone.Conditions: None.