Panasonic KX-UTG200 Operating Instructions Manual

Also see for KX-UTG200: Brochure & specs Getting started Administrator's guide Setup guide Administrator's guide

Contents

Panasonic KX-UTG200 Operating Instructions Manual Manual pdf 16 page image

• Flashing red: A shared line*1 is on hold (normal) at another unit.*1 Shared line is an optional feature and may not be supported on your phone system. See Page 30 for information.Soft Button IconsSoft buttons icons are displayed for functions that can be used depending on the screen displayed and thestate of the unit. IfMore is displayed, you can press it to display other available soft button icons. SeePage 18 for a list of commonly used soft button icons.IconsStatus IconsStatus icons indicate the status of the unit and are displayed at the top of the screen in the status bar.Icon DescriptionDisplayed when the ringer is turned off (Page 20).Displayed when [HEADSET] is pressed.Displayed when the connection to the LAN is lost. If this icon is displayed, checkthe Ethernet cable connection.Displayed when ECO mode is enabled.Displayed when a firmware upgrade is available.Line IconsLine icons indicate the status of lines in the Phone screen.General LineIconShared LineIcon*1 DescriptionDisplayed when registering to the SIP server.Displayed when registration to the SIP server has been lost. If this iconis displayed, consult your administrator or dealer.Indicates the line is registered to the SIP server.Displayed when the line is on a call.Displayed when the line has an incoming call.Displayed when there is a held call recalling.Indicates that DND (Do not Disturb) settings are active for the line.Indicates that call forwarding settings are active for the line.Indicates that auto answer settings are active for the line.16 Operating Instructions Document Version 2014-11Before Operating the Telephone