– "ON": You can communicate using a SIPserver.– "OFF": You cannot communicate using a SIPserver.Note• If SIP settings have not been configured onthe SIP settings screen, you cannot select"ON" (Page 105). For details, contact yournetwork administrator.• When there is a problem with the SIPserver, or when SIP settings are incorrect(on the server or on the unit), etc., and videoconference calls cannot be made, on theHome screen the SIP user name is notdisplayed, and instead "SIP is notregistered" is displayed. In this case, youcannot make calls using IP addresses aswell as SIP. Contact your networkadministrator.5. Press [G].• A dialog box to confirm the saving of settings isdisplayed.6. Use [ ][ ] to select "Yes" and press [Enter].• The select local site screen is displayed.7. Press [Home].• The Home screen is displayed.Selecting a Local Site1. Press [Menu].• The Menu screen is displayed.2. Use [ ][ ] to select "Select local site" andpress [Enter].• The select local site screen is displayed.3. Use [ ][ ] to select the local site you want to use.Note• For the currently selected local site," " is displayed in "Selected".• "Not Registered" is displayed for sites thathave not been registered.4. Press [G].• A dialog box to confirm the temporary use of theselected local site is displayed.5. Use [ ][ ] to select "Yes" and press [Enter].• The Home screen is displayed.Note• When the current connection mode and theselected local site’s connection mode aredifferent, the system will automaticallyrestart to reflect changes to systemsettings.Note• When changing the connection mode, the timerequired for a restart may depend on networkconditions.• When you select a local site, the name enteredin "Local site name" is displayed instead of theunit name in the unit information.• If you turn the power off and then back on, thelocal site is returned to the site set on the systemsettings screen.114 Operating Manual Document Version 2012-03Contacts and Settings
