Remote ControlPress to show the sub video camera’s images on your and the other party’sdisplay during a video conference call. When not on a video conference call,the sub video camera’s images are shown on your display only (Page 77).Press to display/hide informationabout the other party, guide areaand duration, during a call (Page35).Press to change the layout of thescreen during a call (Page 51).Press to return to the main videocamera after showing images from acomputer or sub video camera(Page 74, 78).Press to display the Menu screen(Page 32).Press to end a call.Press to confirm the selected item orentered information.Press to return to the previousscreen.Press to adjust the volume during acall. Press [+] to increase and [–] todecrease the volume (Page 64).Press to select a tone (equalizer)setting during a call (Page 68).Press to mute the microphoneduring a call, so that the other partycannot hear your voice (Page 65).Press to display your contact list.This can be pressed while thefollowing screens are displayed:• Home screen• Menu screen• Computer’s screen/sub videocamera’s image (when not on avideo conference call)Press to show your computer’sscreen on your and the other party’sdisplay during a video conferencecall. When not on a video conferencecall, the computer screen is shownon your display only (Page 70).Press to enter screen standby mode(Page 23).Press to make or manually answervideo conference calls (Page 37, 47).Press to move the cursor and selectitems.Press to display the Home screen(Page 31).Used for controlling a PTZ (Pan, Tilt,Zoom) camera either at your end orthe other party’s end (Page 59).Press to select the feature assignedto each color. Available features aredisplayed in the guide area (Page31).Press to display the connectionstatus of the network and peripheraldevices (Page 80).Press to dial or perform settings where inputting digits/characters isrequired (Page 116).Document Version 2012-03 Operating Manual 21Preparation
