Video Conference Call ScreenADFBCEGOther party’s informationWhen registered in the contact list: The other party’s name/group name is displayed.When not registered in the contact list: The other party’s IP address or host name (e.g., www.example.com)is displayed.Video ImageDisplays the other party’s video, your own video, or video from the secondary video input such as acomputer display or a sub video camera (Page 59, Page 63).SubscreenDepending on the screen layout, your own video or the other party’s video is displayed here (Page 47,Page 49, Page 52).DurationDisplays the duration of the current video conference call.GuideDisplays operations you can perform with the remote control.Network Status IndicationThe number of antennas in the icon indicates differing levels of network congestion.The icon changes as follows:0 bars ( ): The network is very congested.1 bar ( ): The network is congested.2 bars ( ): The network is slightly congested.3 bars ( ): The network is not congested.Note• If the icon shows only 0–1 bars continuously, contact your network administrator.• During multiple-party video conference calls, the icon is displayed on each site screen, but not onyour own image.• You can set whether to display the icon. This setting affects all displayed images (excluding yourown image) (Page 81). For example, if icon display has been enabled, the icon will be displayedon the image of all other parties, but not on your own image. However, if icon display has beendisabled, the icon will not be displayed on any of the images.Status IndicationThe status of the unit is displayed with an icon (Page 29).Document Version 2011-04 Operating Manual 31Preparation
