4. Enter the length of time (0–99) in minutes until theunit enters screen standby mode (default: 10).Note• If you set "0", the unit will not enter screenstandby mode automatically. However, ifyou press the remote control’s [Video OutOn/Off] button, the unit will enter screenstandby mode even if "0" is set.5. Press [G].• A dialog box to confirm the saving of settings isdisplayed.6. Use [ ][ ] to select "Yes" and press [Enter].• The admin menu screen is displayed.7. Press [Home].• The Home screen is displayed.Making AdministratorPassword Settings1. Login to the administrator menu (Page 88).• The admin menu screen is displayed.2. Press [ ].• The second page is displayed.3. Use [ ][ ] to select "Password Settings" andpress [Enter].• The password settings screen is displayed.4. Use [ ][ ] to select the following items and entera password (4–10 digits):"Current password": Enter the current password(default: 00000000)."New password": Enter the new password."Retype new password": Enter the new passwordagain.Note• Please change the default login passwordthe first time the unit is installed.• Be sure to keep the password safe.5. Press [G].• A dialog box to confirm the changing of settingsis displayed.6. Use [ ][ ] to select "Yes" and press [Enter].• The admin menu screen is displayed.7. Press [Home].• The Home screen is displayed.Performing System Initialization1. Login to the administrator menu (Page 88).• The admin menu screen is displayed.2. Press [ ].• The second page is displayed.3. Use [ ][ ] to select "System Initialize" andpress [Enter].• A dialog box to confirm the start of systeminitialization is displayed.Document Version 2011-04 Operating Manual 93Contacts and Settings
