Panasonic KX-VC300 Operating Manual

Also see for KX-VC300: Brochure & specs Frequently asked questions Manual Brochure User guide

Contents

Panasonic KX-VC300 Operating Manual Manual pdf 95 page image

4. Press [G].• The registration key code input screen isdisplayed.5. Enter the 16-digit registration key code.6. Press [G].• A dialog box to confirm the saving of settingsand system restart after saving is displayed.7. Use [ ][ ] to select "Yes" and press [Enter].• The system will automatically restart to reflectchanges to system settings.Note• If the registration key code you entered isinvalid, "Failed Registration Key codeauthentication." is displayed. Repeat theprocedure from step 5. If this message isdisplayed even when you have correctlyinput the registration key code that wasissued, contact your dealer.• Registration is possible only oneregistration key code can be registered atonce. To register multiple registration keycodes for enabling multiple features, arestart is necessary for each registration.• Activated features can also be checked onthe enhanced feature confirmation screen(Page 88).Making Local SiteSettingsYou can register up to 5 temporary local sites. Thesame unit can be used in multiple meeting roomswithout the need to change certain basic networksettings.Registering a Local Site1. Press [Menu].• The Menu screen is displayed.2. Use [ ][ ] to select "Select local site" andpress [Enter].• The select local site screen is displayed.3. Use [ ][ ] to select "Not Registered" and press[B].• The local site settings screen is displayed.4. Use [ ][ ] to select the following items for input:"Local site name": Enter a name for the local site."IP Address": Enter an IP address.• If the IP address contains 1 or 2 digit numbers,enter these numbers as they are. Do not enterlike [.001].Example: The IP address is [192.168.0.1].– Correct entry: [192.168.0.1]– Wrong entry: [192.168.000.001]"Subnet mask": Enter the subnet mask."Default Gateway": Enter the IP address of thedefault gateway."Max. Bandwidth": Press [Enter] and use [ ][ ] to select the maximum allowed bandwidth toDocument Version 2011-04 Operating Manual 95Contacts and Settings