Video Conference Call ScreenADFBCEGOther party’s informationWhen registered in the contact list: The other party’s name/group name is displayed.When not registered in the contact list: The other party’s IP address, SIP URI (SIP user name@SIP domainname), host name (e.g., www.example.com), MCU’s conference room number@IP address, or MCU’s SIPuser name@IP address is displayed. If the other party uses the same SIP domain as you, only the SIPuser name, and not the SIP URI, is displayed.Video ImageDisplays the other party’s video, your own video, or video from the secondary video input such as acomputer display or a sub video camera (Page 64, Page 68).SubscreenDepending on the screen layout, your own video or the other party’s video is displayed here (Page 47,Page 49, Page 52).DurationDisplays the duration of the current video conference call.Note• 99h59m is displayed for the duration even if the length of the video conference call exceeds 100hours.GuideDisplays operations you can perform with the remote control.Network Status IndicationThe number of antennas in the icon indicates differing levels of network congestion.The icon changes as follows:0 bars ( ): The network is very congested.1 bar ( ): The network is congested.2 bars ( ): The network is slightly congested.3 bars ( ): The network is not congested.Note• If the icon shows only 0–1 bars continuously, contact your network administrator.• During multiple-party video conference calls, the icon is displayed on each site screen, but not onyour own image.32 User ManualPreparation
