9. Use the following procedure to change the ID of theremote control.1. Press and hold [·] and [#] at the same time.2. Within 2 seconds after you release the buttons,press the number (1 to 3) corresponding to theID that you specified for "Remote control ID"in step 4.– 1: ID1– 2: ID2– 3: ID310. Press [Enter].• The dialogue box disappears and the remotecontrol ID of the unit will be saved.Note• If the dialogue box does not disappear,repeat the procedure above, several timesif necessary. If the dialogue box still doesnot disappear, turn the power off and thenback on to cancel the settings. For details,contact your dealer.11. Press [Home].• The Home screen is displayed.Making Language Settings1. Press [Menu].• The Menu screen is displayed.2. Use [ ][ ] to select "Settings" and press[Enter].• The system settings screen is displayed.3. Press [ ].• The second page is displayed.4. Use [ ][ ] to select "Language Setting" andpress [Enter].• The language settings screen is displayed.5. Press [Enter] and use [ ][ ] to select the desiredlanguage.Note• According to the model, the language youcan select is different as follows:For KX-VC500BX: English(UK) (default),English(US), Português, EspañolFor KX-VC500CX: English (default),Español, Português, РусскийязыкFor KX-VC500EX: English (default),Deutsch, Français, Italiano, Español,Nederlands, Português6. Press [Enter].7. Press [G].• A dialogue box to confirm the saving of settingsis displayed.8. Use [ ][ ] to select "Yes" and press [Enter].• The system settings screen is displayed in theselected language.Note• If you accidentally choose the wronglanguage, follow the steps below to changethe language setting.1. Press [Home].2. Press [Menu].3. Press [ ] four times to select the fifthitem from the top, press [Enter].4. Press [ ].92 User ManualContacts and Settings
