Panasonic KX-VC500 Operating Manual

Also see for KX-VC500: User guide Brochure User manual Operating manual

Contents

Panasonic KX-VC500 Operating Manual Manual pdf 97 page image

3. Use [ ][ ] to select the following items and entera password (4–10 digits):"Current password": Enter the current password(default: 00000000)."New password": Enter the new password."Retype new password": Enter the new passwordagain.Note• Please change the default login passwordthe first time the unit is installed.• Be sure to keep the password safe.4. Press [G].• A dialogue box to confirm the changing ofsettings is displayed.5. Use [ ][ ] to select "Yes" and press [Enter].• The admin menu screen is displayed.6. Press [Home].• The Home screen is displayed.Making Encryption SettingsNote• Be careful when changing encryption settingsbecause doing so may cause you to becomeunable to communicate with other parties.• There is a danger that encryption settings willbe changed by a third party. Therefore, becareful when managing the administratorpassword and giving users the authority tochange encryption settings.• If an encryption key is not set, you cannotenable encryption.• Be aware that if encryption is disabled,eavesdropping might be possible on networksthat are not secured against such actions.1. Login to the administrator menu (Page 96).• The admin menu screen is displayed.2. Use [ ][ ] to select "Encryption" and press[Enter].• The encryption settings screen is displayed.3. Use [ ][ ] to select the following items for input:"Access mode": Use [ ][ ] to select"Admin" (default) or "User".• When "Admin" is selected, only the networkadministrator can enable/disable encryption.• When "User" is selected, any users canenable/disable encryption (Page 85,Page 106)."Encryption": Use [ ][ ] to select whether toenable encryption.– "ON": Encryption is enabled.– "OFF" (default): Encryption is disabled.Note• To select "ON", specifying the encryptionkey is required (Page 97).• If the "Encryption" setting does not matchthat of the other party in a video conferencecall, the video conference call will not start.• This setting is available only when"Admin" is selected for "Access mode".• When connecting to an MCU ornon-Panasonic video conference system,set "Encryption" to "OFF" becauseencryption is not available. Encryption mustbe disabled on both sides."Encryption Key": Enter an encryption key (4 to256 characters [alphanumeric, space, symbols])(Page 110).User Manual 97Contacts and Settings