3. Press [ ] twice.• The third page is displayed.4. Use [ ][ ] to select "Enhancement" and press[Enter].• The enhanced feature confirmation screen isdisplayed.Note• Features that have already been activatedare displayed in "Activated Features", asfollows:– "Connection Enhancement": Connectionto MCUs and non-Panasonic videoconference systems is available.– "None": No features have been activated.5. Press [Home].• The Home screen is displayed.Performing a Network TestYou can confirm whether a network connection can beestablished with a particular IP address.Note• You cannot perform a network test from thecontact list screen or the call history screen.1. Press [Menu].• The Menu screen is displayed.2. Use [ ][ ] to select "Settings" and press[Enter].• The system settings screen is displayed.3. Press [ ] twice.• The third page is displayed.4. Use [ ][ ] to select "Network Test" and press[Enter].• The network test screen is displayed.5. Enter an IP address.Note• If the IP address contains 1 or 2 digitnumbers, enter these numbers as they are.Do not enter like [.001].Example: The IP address is [192.168.0.1].– Correct entry: [192.168.0.1]– Wrong entry: [192.168.000.001]6. Press [R].• The network test starts. After the network test isfinished, if the network test was successful ortimed out, the details of the results aredisplayed. If the network test failed, a messageindicating the failure is displayed.7. Press [Home].• The Home screen is displayed.Performing Self DiagnosisYou can check how your image will be displayed andhow your voice will be heard to the other party beforestarting a video conference call, using your own displayand speakers.1. Press [Menu].• The Menu screen is displayed.94 User ManualContacts and Settings
