5. Insert the included power cord (F) into the AC INterminal on the back of the KX-VC500.• Use only the included power cord.6. Plug in the power cord into the power outlet.• Choose an outlet that is convenient forplugging/unplugging.System Layout ExamplesDisplay and Main Video CameraPlace the display and main video camera at the sameside of the room.Note• If you use speakers, refer to "Amplifier/ActiveSpeaker Connection" (Page 23).MicrophonesUp to 4 Boundary Microphones can be connected incascade. There are no separate terminals for input andoutput on the Boundary Microphones.Also, Boundary Microphones and general-purposemicrophones can be used simultaneously.Note• Make sure that the microphones are placed atleast 1 m away from the display and speakers.• Do not connect more than 4 BoundaryMicrophones. Doing so will cause all BoundaryMicrophones to stop working.• Monaural or stereo can be selected for theoutput of microphones through system settings.Layout examples (the grey circle indicates themicrophone’s range):DisplayMicrophone4 m4 mMicrophone MicrophoneDisplay4 mUser Manual 21Preparation
