Panasonic KX-VC500 User Manual

Also see for KX-VC500: User guide Brochure Operating manual Operating manual

Contents

3. Use [ ][ ] to select "Sound Settings" and press[Enter].• The sound settings screen is displayed.4. Use [ ][ ] to select the following items for input:"Welcome Screen Vol.": Press [Enter] and use[ ][ ] to select the volume level ("Low","Medium" [default] or "High") played at thestart-up."Ringback Tone Vol.": Press [Enter] and use[ ][ ] to select the volume level ("Low","Medium" [default] or "High") of an outgoing callring.Note• The volume level of the busy tone will be thesame level as the ring back tone."Ring Tone Vol.": Press [Enter] and use [ ][ ] to select the volume level ("Low","Medium" [default] or "High") of an incoming callring."Default Sound Lev.": Use [ ][ ] to select thevolume level (0–20) at the start of a videoconference call (default: 16)."Sound Pre-sets": Press [Enter] and use [ ][ ] to select the tone ("More Highs","Standard" [default], "More Lows", "Voice" or"Music") at the start of a video conference call.(Page 48)Note• You can listen to a sample of the followingitems by pressing [R].– "Welcome Screen Vol."– "Ringback Tone Vol."– "Ring Tone Vol."5. Press [G].• A dialogue box to confirm the saving of settingsis displayed.6. Use [ ][ ] to select "Yes" and press [Enter].• The system settings screen is displayed.7. Press [Home].• The Home screen is displayed.Making Connection Settings1. Press [Menu].• The Menu screen is displayed.2. Use [ ][ ] to select "Settings" and press[Enter].• The system settings screen is displayed.3. Use [ ][ ] to select "Call set up" and press[Enter].• The connection settings screen is displayed.4. Use [ ][ ] to select the following items for input:• The following items are displayed over 2 pages.To view all the items, press [R] to move to thenext page, and press [B] to move to theprevious page.• You must save the settings separately for eachscreen on which you changed the settings."Answer Mode": Use [ ][ ] to select how toanswer video conference calls ("Manual" [default]or "Auto"). (Page 37)"Max. Bandwidth": Press [Enter] and use [ ][ ] to select the maximum allowed bandwidth tobe used (1.0Mbps, 1.2Mbps, 2.0Mbps, 3.0Mbps,User Manual 63Contacts and Settings