Panasonic KX-VC500 User Manual

Also see for KX-VC500: User guide Brochure Operating manual Operating manual

Contents

Message Cause and SolutionReceived remote control ID(n1). VC500 current setting is(n2).Press [Home] button usingthe correct remote control, orsetup remote control asfollows.1. Press [.] and [#] at the sametime2. Within 2 seconds, press[n2]3. Press [Home] to finish, thismessage will disappear.If this message will notdisappear, please check thebatteries in your remotecontrol and try again.Note• The remote control IDof the remote control(1/2/3) is representedby n1.• The remote control IDof the KX-VC500 (1/2/3) is represented byn2.• The remote control IDs of the KX-VC500 and remote control do notmatch.→ Follow the on-screen instructions to change the remote control ID of theremote control to match that of the KX-VC500.→ If you cannot change the remote control ID of the remote control,contact your dealer.→ If multiple remote controls with assigned IDs will be used close togetheror if you do not want this message to be displayed, select "OFF" for"Check ID mismatch". (Page 68)The IP Address is invalid.Please enter a valid IPAddress.• The IP address contains an invalid value.→ Enter the IP address correctly. The correct format isXXX.XXX.XXX.XXX (dotted format decimal notation).If the IP address contains 1 or 2 digit numbers, enter these numbers asthey are. Do not enter like [.001].Example: The IP address is [192.168.0.1].– Correct entry: [192.168.0.1]– Wrong entry: [192.168.000.001]Multicast or broadcast addresses cannot be used.Check the IP Address. • The IP address of the other party is the same as your own IP address.• The same IP address is used for several parties in a multiple-party videoconference call.→ Register the correct IP address.→ Check the IP address registered in the contact list.User Manual 97Additional Information