Panasonic KX-VC500 User Manual

Also see for KX-VC500: User guide Brochure Operating manual Operating manual

Contents

Making Remote ControlSettingsYou can specify a remote control ID from 1, 2, or 3 forboth the remote control and the KX-VC500. TheKX-VC500 responds to signals from any remote controlwith the same remote control ID as itself. If you do notspecify an ID, the KX-VC500 responds to signals fromall remote controls. You can confirm the remote controlID for the KX-VC500 on the Home screen. (Page 25)1. Press [Menu].• The Menu screen is displayed.2. Use [ ][ ] to select "Settings" and press[Enter].• The system settings screen is displayed.3. Press [ ].• The next page is displayed.4. Use [ ][ ] to select "Remote Ctrl ID" and press[Enter].• The remote control settings screen is displayed.5. Use [ ][ ] to select the following items for input:"Remote ID enable": Use [ ][ ] to select"ON" or "OFF" (default).• When "ON" is selected, you can set a specificremote control ID for the KX-VC500.• When "OFF" is selected, the KX-VC500 willrespond to all remote controls."Remote control ID": Use [ ][ ] to select aremote control ID ("ID1" [default]/"ID2"/"ID3") forthe KX-VC500."Check ID mismatch": Use [ ][ ] to select"ON" (default) or "OFF".• When "ON" is selected, if the KX-VC500receives a signal from a remote control that hasan ID different from the one specified on theHome screen, a warning is displayed. Followthe procedures on the screen to change theremote control ID.• When "OFF" is selected, even if theKX-VC500 receives a signal from a remotecontrol that has an ID different from the onespecified, no warning is displayed on the Homescreen.Note• If multiple remote controls with assignedIDs are being used close together, it isrecommended that you select "OFF" for"Check ID mismatch".6. Press [G].• A dialogue box to confirm the saving of settingsis displayed.7. Use [ ][ ] to select "Yes" and press [Enter].8. When "Remote ID enable" is set to"ON" (Page 68):The dialogue box for changing the ID of the remotecontrol is displayed. Proceed to step 9.Note• While the dialogue box is displayed, videoconference calls cannot be received.When "Remote ID enable" is set to"OFF" (Page 68):The system settings screen is displayed. Press[Home] to return to the Home screen.68 User ManualContacts and Settings