Panasonic LJ-SK56A Installation Manual

Also see for LJ-NA02: User manual User manual

Panasonic LJ-SK56A Installation Manual Manual pdf 68 page image

68Installation Manual7. Setting Parameters for Grid Operator7-1. Setting ParametersTo operate this system normally, it is necessary to set the operation parameters. Note that the system may fail tooperate normally if these parameters are not properly set.● The system cannot operate normally if the operation data have not been set correctly.● Only the grid operator can set up and operate this parameter. The password is not in this installation manual.7-2. Switching to the Parameter Item Selection ModePreparation• Set the storage battery system to the stopped state in the normal state. The system can only be switched to theparameter setting mode while it is in a stopped state.Operation ProcedureNormal StateStopped (Grid-connected)3 secPassword match1 secStopped (Stand-alone)Password Input Parameter Item SelectionGrid-connectedProtection Level SettingInitial Display+• Press "DATA (▲)" + "MENU (ENTER)" simultaneously for three seconds to switch to the password input mode.• Enter the password when prompted. The system switches to the parameter item selection mode if the enteredpassword is correct.(See 6-3 Password Input for details on the password input mode)• The initial display [no4.00] of the parameter item selection mode appears if the mode switch is successful.• To return to the normal state, press "ON/OFF" for one second while in the password input mode or parameter itemselection mode.