Installation Manual10.Complete SettingsThe settings are now complete.Attach the front lid by referring to P.26.When connecting the Network Adaptor, refer to the Setting Manual which is included with the Network Adaptor, thenperform the settings. Finally, cut "Emergency Response Measures sheet" below and put it and "Stop procedure label"in a prominent position near the battery storage system.[ FIRST-AID MEASURES]Spilled internal cell materialsInhalation : Make the victim blow his/her nose, gargle. Seek medical attention if necessary.Skin contact : Remove contaminated clothes and shoes immediately. Wash extraneous matter or contactregion with soap and plenty of water immediately.Eye contact : Do not rub one’ s eyes. Immediately flush eyes with water continuously for at least 15 minutes.Seek medical attention immediately.A battery cell and spilled internal cell materialsIngestion : Make the victim vomit. When this is not possible or feeling unwell after vomiting, seek immediatemedical attention.[FIRE-FIGHTING MEASURES]Suitable extinguishing media : Plenty of water, carbon dioxide gas, nitrogen gas, chemical powder fireextinguishing medium and fire foam.Specific hazards : Corrosive gas may be emitted during fire.Specific methods of fire-fighting : When the battery burns with other combustibles simultaneously, takefire-extinguishing method which correspond to the combustibles. Extinguish a fire from the windward as muchas possible.Special protective equipment for firefighters :Respiratory protection : Respiratory equipment of a gas cylinder style or protection-against-dust maskHand protection : Protective glovesEye protection : Goggle or protective glasses designed to protect against liquid splashesSkin and body protection: Protective cloth[ACCIDENTAL RELEASE MEASURES]Spilled internal cell materials, such as electrolyte leaked from a battery cell, are carefully dealt with according tothe followings.Precautions for human body: Remove spilled materials with protective equipment (protective glasses andprotective gloves). Do not inhale the gas as much as possible. Moreover, avoid touching with as much aspossible.Environmental precautions: Do not throw out into the environment.Method of cleaning up: The spilled solids are put into a container. The leaked place is wiped off with dry cloth.Prevention of secondary hazards: Avoid re-scattering. Do not bring the collected materials close to fire.Emergency Response Measures