57VQT1S48Advanced (Recording pictures)Press [MENU/SET] to close the menu.• You can also press the shutter button halfway to finish.Note• When setting exposure bracket, [ ] appears on the screen.• When setting colour bracket, [ ] appears on the screen.• When taking pictures using auto bracket after setting the exposure compensation range, thepictures taken are based on the selected exposure compensation range.When the exposure is compensated, the exposure compensation value appears on the lowerleft of the screen.• The exposure may not be compensated with auto bracket depending on the brightness of thesubject.• The auto bracket/colour bracket setting is cancelled if you turn the camera off or[POWER SAVE] is activated.• When auto bracket/colour bracket is set, the auto review function is activated regardless of theauto review setting. (The picture is not enlarged.) You cannot set the auto review function in the[SETUP] menu.• In shutter-priority AE and manual exposure, if the shutter speed is set to more than 1 second,auto bracket is cancelled.• [Œ] is set for the flash when auto bracket/colour bracket is set.• Burst is cancelled when auto bracket/colour bracket is set.• The one set last will take precedence. (auto bracket and colour bracket cannot be setsimultaneously.)[REC] mode:Taking Pictures using Burst ModePictures are taken continuously while the shutter button is pressed.Select the ones you really like from among the pictures you have taken.Press [ ˜/‚ ] to display the burst mode selectionmenu, and then press 3/4 to select the burstmode.A [˜/‚]buttonPress [MENU/SET].• You can also press the shutter button halfway to finish.• The menu screen disappears after about 5 seconds. At this time,the selected item is automatically set.Take a picture.• Hold down the shutter button fully to activate the burst mode.A
