71VQT1S48Advanced (Recording pictures)∫ Birthday/Name setting1 Press 3/4 to select [AGE] or [NAME] and then press 1.2 Press 3/4 to select [SET] and then press [MENU/SET].3 Enter the birthday or name.Birthday:2/1: Select the items (year/month/day).3/4: Setting.[MENU/SET]: Exit.Name: For details on how to enter characters, read the [TITLE EDIT] section on P103.• When the birthday or name is set, [AGE] or [NAME] is automatically set to [ON].• If [ON] is selected when the birthday or name has not been registered, the setting screenappears automatically.4 Press [MENU/SET] to finish.∫ To cancel [AGE] and [NAME]Select the [OFF] setting in step 2 of the “Birthday/Name setting” procedure.Note• The age and name can be printed out using the “PHOTOfunSTUDIO-viewer-” bundled softwareon the CD-ROM (supplied).• If [AGE] or [NAME] is set to [OFF] even when the birthday or name has been set, the age orname will not be displayed. Before taking pictures, set [AGE] or [NAME] to [ON].• The focus range is 1 cm (0.04 feet) (Wide)/2 m (6.57 feet) (Tele) to ¶.• [INTELLIGENT ISO] is activated, and maximum ISO sensitivity level becomes [ISO400].• If the camera is turned on with [BABY1]/[BABY2] set, the age and name are displayed at thelower left of the screen for about 5 seconds, along with the current date and time.• If the age is not properly displayed, check the clock and birthday settings.• If the quality is set to [ ] or [ ] and pictures are taken, the name is not registered on thepictures.• The birthday setting and name setting can be reset with [RESET].• The initial setting for [AF MODE] is [š].Select this when you want to take pictures of a pet such as a dog or a cat.You can set your pet’s birthday and name. You can select to have these appear at the timeof playback, or have them stamped on the recorded image using [TEXT STAMP] (P104).For information about [AGE] or [NAME], refer to [BABY1]/[BABY2] on P70.Note• The initial setting for the AF assist lamp is [OFF].• The focus range is 1 cm (0.04 feet) (Wide)/2 m (6.57 feet) (Tele) to ¶.• [INTELLIGENT ISO] is activated, and maximum ISO sensitivity level becomes [ISO800].• The initial setting for [AF MODE] is [ ].• Refer to [BABY1]/[BABY2] for other information about this mode.Select this when you want to take pictures of sunset view. This allows you to take vividpictures of the red colour of the sun.í [PET]ï [SUNSET]