VQT1S4892Advanced (Recording pictures)Note• When in Intelligent auto mode, only [B/W] or [SEPIA] can be selected.• The Intelligent auto mode is set separately from the other recording modes.• [COLOR EFFECT] becomes disabled when colour bracket is set.For details on [REC] mode menu settings, refer to P23.Adjusting the picture quality for the recorded pictures.Applicable modes: ³±´²Note• When you take pictures in dark places, picture noise may become noticeable. If picture noisebecomes a problem, we recommend that you take pictures after increasing the setting for[NOISE REDUCTION] or lowering the setting for each of the items other than[NOISE REDUCTION].For details on [REC] mode menu settings, refer to P23.Using one of these modes, jitter during picture taking is detected, and the cameraautomatically compensates the jitter, enabling jitter-free images to be taken.Applicable modes:Note• The stabilizer function may not be effective in the following cases.– When there is a lot of jitter.– When the zoom magnification is high.I [PICT.ADJ.][CONTRAST]:[r]: Increases the difference between the brightness and the darkness in the picture.[s]: Decreases the difference between the brightness and the darkness in the picture.[SHARPNESS]:[r]: The picture is sharply defined.[s]: The picture is softly focused.[SATURATION]:[r]: The colours in the picture become vivid.[s]: The colours in the picture become natural.[NOISE REDUCTION]:[r]: The noise reduction effect is enhanced.Picture resolution may deteriorate slightly.[s]: The noise reduction effect is reduced.You can obtain pictures with higher resolution.[STABILIZER][OFF][AUTO] [MODE2] (Wide), or [MODE1] (Tele) will work automatically.[MODE1]: Jitter is always compensated during [REC] mode.[MODE2]: The jitter is compensated for when the shutter button is pressed.
