Panasonic Lumix DMC-3D1 Owner's Manual

Also see for DMC-3D1K: Basic owner's manual

Contents

- 157 -Others• This phenomenon appears when you press the shutter button halfway to set the aperture valueand does not affect the recorded pictures.• This phenomenon also appears when the brightness changes when the camera is zoomed orwhen the camera is moved. This is because of operation of the automatic aperture of thecamera, and it is not a malfunction.• The LCD monitor may flicker for a few seconds after the power is switched on. This is anoperation to correct flicker caused by lighting such as fluorescent lights, LED lights etc. and isnot a malfunction.• Is [LCD Mode] active? (P53)• This is not a malfunction.These pixels do not affect the recorded pictures.• In dark places, noise may appear to maintain the brightness of the LCD monitor. This does notaffect the pictures you are recording.• Is the flash setting set to [Œ]?> Change the flash setting. (P85)• The flash is not available when [Auto Bracket] (P99) or [Burst] (P102) in the recording menuare set.• The flash is activated twice when Red-Eye Reduction (P85) has been set.• Has [Flash Burst] (P77) in Scene Mode been set?LCD monitorThe LCD monitor becomes darker or brighter for a moment.The LCD monitor flickers indoors.The LCD monitor is too bright or dark.Black, red, blue and green dots appear on the LCD monitor.Noise appears on the LCD monitor.FlashThe flash is not activated.Flash is activated several times.