Basic- 52 -• The number of days that have passed since the departure date can be printed out using the“PHOTOfunSTUDIO” bundled software on the CD-ROM (supplied).• The travel date is calculated using the date in the clock setting and the departure date you set.If you set [World Time] to the travel destination, the travel date is calculated using the date inthe clock setting and the travel destination setting.• The travel date setting is memorized even if the camera is turned off.• The number of days that have passed since the departure date is not recorded before thedeparture date.• The [Travel Date] feature is disabled for Motion picture recorded in 3D motion pictures or[AVCHD] motion pictures.• While recording motion pictures, the [Location] feature is disabled.• When Intelligent Auto Mode is selected, the [Travel Date] feature is disabled. Setting of otherRecording Mode will be reflected.• When you connect the camera to a TV, the volume of the TV speakers does not change.[Travel Date]Departure date and return date of the travel as well as the nameof the travel destination can be set.You can display the number of days that have passed whenplaying back the pictures and stamp it on the recorded pictureswith [Text Stamp] (P117).[Travel Setup]:[SET]:Departure date and return date are set. Elapsed days (how manydays after) of the travel are recorded.[OFF]:Elapsed days are not recorded.• The travel date is automatically canceled if the current date is afterthe return date. If the [Travel Setup] is set to [OFF], [Location] will bealso set to [OFF].[Location]:[SET]:Travel destination is recorded at the time of recording.[OFF]• For details on how to enter characters, refer to “ Entering Text ” onP84.[Beep]This allows you to set the beep and shutter sound.[r] ([Beep Level]):[t] (Low)[u] (High)[s] (Muted)[ ] ([Shutter Vol.]):[ ] (Low)[ ] (High)[ ] (Muted)[ ] ([Beep Tone]):[ ]/[ ]/[ ][ ] ([Shutter Tone]):[ ]/[ ]/[ ][Volume] Adjust the volume of the speaker to any of 7 levels.