Basic- 26 -Taking 3D picturesWith the two lenses built into this unit, you can record 3D pictures.• 3D pictures are stored in MPO format. In this unit both MPO images and fine JPEG images arerecorded simultaneously.• The following functions are activated automatically.– [Auto] in [Sensitivity]/Auto White Balance/[Quick AF]/[i.Resolution]/[AF Assist Lamp]/[Stabilizer]Set the 3D/2D switch to [3D].Aim the AF area at the point you want to focus on.Press the shutter button halfway to focus.A ISO sensitivityB Aperture valueC Shutter speed• Be careful not to get too close to the subject.If the distance to the subject is too close, the 3D alertindication [ ] will appear. The recommendedrange for 3D recording may differ depending on theamount of zoom. (P27)• Make sure that your fingers are not over either ofthe lenses.During 3D recording, the image from the right-handlens is not displayed. If a finger etc. is covering alens, the 3D alert indication [ ] will appear.• The focus indication D (green) lights when thesubject is focused.• Aperture value and shutter speed is displayed in redwhen correct exposure is not achieved. (Excludewhen using a flash)Press the shutter button fully (push it infurther), and take the picture.3D2DA B CD
