- 161 -OthersIn the following cases, there is no problem with the camera, so do not worry.• There is a rattling sound when the camera is shaken while the power is off or during PlaybackMode. (Sound of lens moving)• There is a rattling sound etc., when the power is turned on or off, or when switching fromRecording Mode to Playback Mode. (Sound of the aperture)• When you hear a clicking or snapping sound from the lens while taking pictures. (The sound ofthe aperture adjusting to changes in light levels)When this occurs, the image on the LCD monitor may appear to change dramatically. However,the picture is not affected.> Touch [ ], select the [Setup] menu icon [ ]. Then select [~] to set the desiredlanguage. (P59)• In dark places, the AF Assist Lamp lights red to make it easier to focus on a subject.• Is [AF Assist Lamp] on the [Rec] Mode menu set to [On]? (P104)• The AF Assist Lamp does not turn on in bright places.• The surface of the camera may become warm during use. This does not affect the performanceor quality of the camera.• When the brightness changes due to zoom or camera movement etc., the lens may click andthe picture on the screen may drastically change. However, the picture is not affected. Thesound is caused by the automatic adjustment of the aperture. This is not a malfunction.• If you do not use the camera for a long time, the clock may be reset.> [Please set the clock] message will be displayed; please re-set the clock. (P21)• When using the Extended Optical zoom or the Intelligent Zoom, the zooming action will stoptemporarily. This is not a malfunction.OthersWhen shaking the camera, there is a rattling sound.An unreadable language was selected by mistake.A red lamp sometimes turns on when the shutter button is pressed halfway.The AF Assist Lamp does not turn on.The camera becomes warm.The lens clicks.The clock is reset.Zooming stops instantaneously.