VQT1P0916PreparationNote• Do not turn this unit off, remove its battery or card or disconnect the AC adaptor(DMW-AC5PP; optional) when the access indication is lit [when pictures are being reador deleted or the built-in memory or the card is being formatted (P24)]. Furthermore, donot subject the camera to vibration or impact. The card or the data on the card may bedamaged, and this unit may no longer operate normally.• The data on the built-in memory or the card may be damaged or lost due to electromagneticwaves, static electricity or breakdown of the camera or the card. We recommend storingimportant data on a PC etc.• Do not format the card on your PC or other equipment. Format it on the camera only to ensureproper operation. (P24)• Keep the Memory Card out of reach of children to prevent swallowing.Setting Date/Time (Clock Set)We recommend selecting [LANGUAGE] (P24) from the [SETUP] menu (P20) beforesetting date/time.• The clock is not set when the camera is shipped.Press [MENU/SET].Press 2/1 to select the items (year, month,day, hour, minute or display sequence), andpress 3/4 to set.A: Time at the home areaB: Time at the travel destination (P55)‚: Cancel without setting the clock.Press [MENU/SET] to set.• After completing the clock settings, turn the camera off.Then turn the camera back on, switch to recording mode, and check that the displayreflects the settings that were performed.• When [MENU/SET] has been pressed to complete the settings without the clock havingbeen set, set the clock correctly by following the “Changing the clock setting (In normalpicture mode)” procedure below.Turn the camera on.• The [PLEASE SET THE CLOCK] message appears.(This message does not appear in [PLAYBACK]mode.)A [MENU/SET] buttonB Cursor buttons1 ONOFFAB/SETMENU2::34
